Application of glass fiber gridding cloth in architecture

2022-11-25


The chemical composition of glass fiber is mainly silicon dioxide and boron trioxide, which determine the properties and process characteristics of glass fiber.

The chemical composition of glass fiber is mainly silicon dioxide and boron trioxide, which determine the properties and process characteristics of glass fiber. Glass fiber has many excellent properties, such as high strength, low expansion, corrosion resistance, electrical insulation, non combustion, etc. The glass of a specific component is melted, then flows out through a small hole, and then is drawn Fine fibers can be made into fabrics with various varieties. There are usually glass fiber cloth, glass fiber mat and non-woven fabric. However, short fiber reinforced composites are far inferior to similar long fiber reinforced composites in terms of strength, stiffness and fatigue resistance. However, due to the high production rate of short fibers, they can be made into components with complex shapes and are cheap, so they are widely used. Short cut glass felt has good paving and non orientation, and the strength, especially the stiffness and thermal stability of the reinforced composite material is much better than that of the matrix material (engineering plastics) without fiber reinforcement; Compared with unidirectional continuous fiber reinforced composites, the transverse tensile strength and shear strength are much higher; The interlaminar tensile strength and shear strength are much higher than those of unidirectional (and laminated) composites.

Glass fiber/polypropylene composites Long glass fiber reinforced thermoplastic composites have developed rapidly in recent years. Long glass fiber reinforced thermoplastic composites are made by fully soaking long glass fibers with resin through a specially made soaking device under certain conditions. Common thermoplastic resins include polypropylene, nylon, polyester and polycarbonate. Long fiber reinforced thermoplastic has become an ideal material for the automotive industry to achieve the goal of low cost and high efficiency because of its excellent characteristics [12]. It is also widely used in aerospace, chemical and electronic industries There are many scholars and experts committed to this composite material

composition