Heat resistance of glass fiber

2022-11-25


Compared with other organic fibers, glass fiber has high heat resistance. This is because the softening temperature of glass fiber is up to 550-750 ℃.

Compared with other organic fibers, glass fiber has high heat resistance. This is because the softening temperature of glass fiber is up to 550-750 ℃, while nylon is only 232-250 ℃, acetate fiber is 204-23 ℃, and polystyrene is lower, only 88-110 ℃.

Hold at the specified temperature for 5 minutes, and then measure the break of glass fiber, The results show that the strength of the glass fibers made of sodium calcium and Lupeng silicate does not decrease until they are heated to 400 and 500 ℃. That is, before the softening temperature of the fiber, its strength does not decrease. Therefore, it is considered that glass fiber can be used at a temperature lower than 500 ℃ without causing damage. In this respect, glass fibers are much better than known organic fibers.

The strength of glass fiber at high temperature is the total effect of two reactions. That is, when the temperature rises, the thermal motion of particles increases, the molecular bond weakens, and the strength decreases. However, with the increase of temperature, the particle displacement ability is enhanced, especially on the surface. Because of particle displacement, the microcrack tip will be fused and passivated, resulting in stress concentration Decrease, thus increasing the strength. The high temperature strength of glass fiber will not decrease, but the strength will decrease during heat treatment. The experiment shows that the strength of the fiber begins to decrease when it is heated to 200 ℃ or above and then cooled. After heat treatment at 600-700 ℃, its strength is only 20% - 30% of the original The fiber quality is reduced. The decrease of fiber strength after heat treatment is a non reversible process. Reheating can no longer increase fiber strength. The decrease of fiber strength after heat treatment is also related to the heating time. If the heating time is prolonged, the fiber strength will decrease.

Compared,resistance