Uncovering The Manufacturing Process and Application Areas of Glass Fiber Yarn

2024-09-25


Glass Fiber Yarn

Uncovering The Manufacturing Process and Application Areas of Glass Fiber Yarn

Glass fiber yarn, as a kind of high-performance inorganic non-metallic material, is a filamentary fiber product made of glass liquid in molten state spun by a special process. Its main components include silicon dioxide (SiO2), calcium oxide (CaO), sodium oxide (Na2O) and a small number of other additives, through precise control of the proportion of raw materials and processing technology, you can obtain different properties of the glass fiber yarn to adapt to the diverse needs.

 

Manufacturing process


Glass fiber yarn is usually manufactured using two methods: direct fusion and indirect fusion. Among them, the most common is the direct melting method, which has the following steps:

1. Preparation of raw materials: High-quality ore raw materials, such as quartz sand, limestone, boric acid, magnesium oxide, etc., are mixed according to a predetermined formula.

2. Melting: The matched raw materials are sent into a large melting furnace and heated to about 1500℃ to form a uniform glass melt.

3. Drawing molding: the molten liquid through the leakage nozzle out, with the help of high-speed rotation of the drawing wheel quickly cooled down and cured, stretched into a thin wire, this process is called “drawing”. The drawing speed determines the thickness and strength of the fiber.

4. Coating slurry: In order to improve the adhesion between the fibers and textile properties, the surface of the fibers will be coated with a special resin slurry.

5. Bunch drying: After the fiber yarns are collected and sorted, they are sent to the drying oven to remove excess water and to complete the hardening of the sizing material.

6. Cutting and Packing: Finally, the dried fiberglass yarns are cut off according to a certain length, then bundled into bundles and packed into storage for downstream customers.

 

Performance Characteristics


1. High strength and rigidity: glass fiber yarn has high tensile strength and modulus of elasticity, and can carry large loads in small cross-sectional area.

2. Temperature and fire resistance: it can work stably in the working environment of 200-300℃ for a long time, and can even withstand higher temperature for a short time.

3. Good insulation: as a non-conductor, glass fiber yarn has excellent electrical insulation properties, suitable for a variety of electrical and electronic equipment.

4. Good corrosion resistance: It has good resistance to most acids, alkalis and solvents, and is suitable for use as a reinforcing material for chemical containers.

5. Low density and light weight: Compared with metal materials, fiberglass yarn has much lower density, which is conducive to the production of lightweight products.

6. Wave-transparent and sound-absorbing: some types of glass fiber yarn have good permeability to electromagnetic waves, and also have a certain sound-absorbing effect.

 

Main applications

 

1. Composite materials: compounded with resin, rubber and other polymers to make high-performance materials such as glass fiber reinforced plastic (GRP) and carbon fiber reinforced plastic (CFRP), which are used in automobiles, aerospace, wind turbine blades and other fields.

2. Construction building materials: as reinforcing materials added to cement mortar, asphalt, paint, to enhance the structural safety and durability of the building; can also be made into glass fiber mesh, used for wall reinforcement, floor leveling and so on.

3. Electrical and electronic: used in the production of printed circuit board (PCB) substrate, motor insulation gasket, cable sheath and other electronic products accessories.

4. Filtration and protection: as a high-efficiency filtration medium, it is used in air purifiers, liquid filters, etc.; it is also used in the production of fire-resistant clothing, heat-insulating blankets, and other protective products.

5. Sports and leisure: golf clubs, skis, fishing rods and other high-end sports equipment, often using glass fiber yarn to enhance its strength and durability.
 

Corrosion Resistance,Filament Drawing Process,Automotive Industry,Construction Reinforcement,Aviation and Aerospace