Fiberglass mesh - a super material for many applications

2024-12-12


Fiberglass mesh fabric is made by soaking and coating glass fiber woven fabric as the base material with polymer emulsion with high resistance.

        I. Basic Composition and Production Process

1. Fiberglass Base Material

Glass fiber is an extremely fine fiber filament drawn from glass. These fiber filaments have high strength and heat resistance. Their main components are usually silicon dioxide, aluminum oxide, etc. The diameter of glass fiber is very fine, generally between a few microns and twenty-some microns. This fineness enables it to be woven into a dense fabric.

During the production process, first, glass raw materials are melted in a high-temperature furnace. Then, through special drawing equipment, the molten glass is drawn into fiber filaments. These fiber filaments are woven by textile machinery into glass fiber woven fabric with a certain specification. This is the basic structure of mesh fabric.

2. Coating Treatment

To improve the performance of fiberglass mesh fabric, such as alkali resistance and flexibility, it needs to be coated. Commonly used coating materials are polymer anti-emulsion, such as acrylic emulsion. During the coating process, the fiberglass woven fabric will be immersed in the emulsion to make the emulsion fully penetrate between the fibers of the fabric. Then, through processes such as drying, a protective film is formed on the fiber surface by the emulsion. This protective film can not only improve the chemical stability of the mesh fabric but also enhance its adhesion to other materials.

        II. Performance Characteristics

1. High Strength

Due to the relatively high strength of glass fiber itself, fiberglass mesh fabric can withstand relatively large tensile force. It can effectively enhance the overall strength of materials. For example, in the building exterior wall insulation system, it can prevent insulation materials from cracking or deforming due to external forces. Generally speaking, its tensile strength can reach several hundred Newtons per meter (N/m). The specific value will vary depending on factors such as the specification and production process of the mesh fabric.

2. Good Alkali Resistance

After being treated with alkali-resistant coating, fiberglass mesh fabric can maintain good performance in an alkaline environment. In the construction field, it often comes into contact with materials containing alkaline components such as cement mortar. Good alkali resistance can ensure its long-term use without being corroded. For example, in a standard alkali immersion test, the strength loss of qualified glass fiber mesh fabric within a specified time (such as 28 days) can be controlled within a certain range, usually not exceeding a certain percentage (such as 50%).

3. Excellent Dimensional Stability

Fiberglass mesh fabric has a relatively small dimensional change under different temperature and humidity conditions. This characteristic enables it to maintain stable performance in various application scenarios and will not affect its reinforcement or protection function due to deformation caused by environmental factors. For example, in an environment with a temperature change range from -20°C to 60°C, its dimensional change rate can be controlled at a very low level, such as less than 0.1%.

        III. Application Fields

1. Construction Industry

- Exterior Wall Insulation System: It is an indispensable reinforcing material in the exterior wall external insulation system. On the outside of insulation boards (such as polystyrene foam boards, rock wool boards, etc.), fiberglass mesh fabric is pasted through adhesive and then finishing mortar is applied. The mesh fabric can effectively prevent cracks in the finishing mortar and improve the durability and impact resistance of the exterior wall insulation system.

- Interior Decoration: In some special interior decoration materials, such as fiber-reinforced gypsum boards, fiberglass mesh fabric can enhance the strength of gypsum boards, making them less likely to break and also improving their fire resistance.

2. Industrial Field

In the manufacturing of industrial equipment that requires enhanced material strength and corrosion resistance, such as the reinforcement of insulation layers of chemical pipelines and the reinforcement of fiberglass products, glass fiber mesh fabric has a wide range of applications. For example, in the manufacturing process of fiberglass pipelines, compounding glass fiber mesh fabric with materials such as resin can significantly improve the strength and pressure resistance performance of the pipeline.

3. Transportation Field

In the manufacturing of transportation tools such as automobiles and ships, fiberglass mesh fabric can be used to reinforce composite materials of vehicle bodies, ship hulls and other components. For example, using composite materials containing glass fiber mesh fabric in parts such as automobile bumpers and body shells can improve the strength and impact resistance of components while reducing weight.

High tensile strength,weather ability,anti-corrosion,Good heat and sound insulation,breathability,fire-proofing materials,Wall reinforcement,composite material